Home
/
Juniper
/
EX9251
/
Hardware Manual

Juniper EX9251, Hardware Manual, Page: 172 / 217

Share

Page: 172 / 217

Juniper EX9251 Hardware Manual Download Page 172

Packing EX9251 Switch Components for Shipping

Before you begin packing a switch component, ensure that you have the following parts and tools
available:

• Antistatic bag, one for each component

• An ESD wrist strap

To pack EX9251 switch components, follow the instructions here.

CAUTION: Do not stack switch components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.

To pack EX9251 switch components:

• Place individual components in antistatic bags.

• Use the original packing materials if they are available. If the original packing materials are not

available, ensure the component is adequately packed to prevent damage during transit. The packing
material you use must be able to support the weight of the component.

• Ensure that the components are adequately protected by wrapping them well with packing materials.

Pack the component in an oversized box (if the original box is not available) with extra packing
material around the unit so that the component is prevented from moving around inside the box.

• Securely tape the box closed.

• Write the RMA number on the exterior of the box to ensure proper tracking.

163

«
...
170
171
172
173
174
...
»

Summary of Contents for EX9251


























































































































































































































Reviews:

No comments