Juniper EX9200 Series Features Manual Download Page 143

Page: 143 / 278

Configure the first term to match on source addresses and then classify the matched
packets.

[edit firewall family inet filter mfc-filter]
user@host#

set term isp1-customers from source-address 10.1.1.0/24

user@host#

set term isp1-customers from source-address 10.1.2.0/24

user@host#

set term isp1-customers then loss-priority low

user@host#

set term isp1-customers then forwarding-class expedited-forwarding

Configure the second term to match on different source addresses and then police
the matched packets.

[edit firewall family inet filter mfc-filter]
user@host#

set term isp2-customers from source-address 10.1.3.0/24

user@host#

set term isp2-customers from source-address 10.1.4.0/24

user@host#

set term isp2-customers then policer ef-policer

Configure the third term to police all other packets to a different set of traffic limits
and actions.

[edit firewall family inet filter mfc-filter]
user@host#

set term other-customers then policer af-policer

Results

Confirm the configuration of the filter by entering the

show firewall

configuration mode

command. If the command output does not display the intended configuration, repeat
the instructions in this procedure to correct the configuration.

[edit]
user@host#

show firewall

family inet {

filter mfc-filter {

term isp1-customers {

from {

source-address 10.1.1.0/24;
source-address 10.1.2.0/24;

}
then {

loss-priority low;
forwarding-class expedited-forwarding;

}

}
term isp2-customers {

from {

source-address 10.1.3.0/24;
source-address 10.1.4.0/24;

}
then {

policer ef-policer;

}

}
term other-customers {

then {

policer af-policer;

}

125

Chapter 11: Multifield Classification

Summary of Contents for EX9200 Series
































































































































































































































































Search results

Summary of Contents for EX9200 Series

Reviews:

Related manuals for EX9200 Series

Brands by name

Popular brands

Juniper EX9200 Series, Features Manual

Search results

Summary of Contents for EX9200 Series

Reviews:

Related manuals for EX9200 Series

Brands by name

Popular brands