Juniper EX9200 Series Features Manual Download Page 251

Page: 251 / 278

policer (Configuring)

Syntax

policer policer-name {

filter-specific;

if-exceeding

{

bandwidth-limit bps;
bandwidth-percent number;
burst-size-limit bytes;

}

logical-bandwidth-policer

;

logical-interface-policer

;

physical-interface-policer

;

shared-bandwidth-policer;
then {

policer-action;

}

Hierarchy Level

[edit dynamic-profiles profile-name firewall],
[edit firewall],
[edit logical-systems logical-system-name firewall]

Release Information

Statement introduced before Junos OS Release 7.4.
The

out-of-profile

policer action added in Junos OS Release 8.1.

The

logical-bandwidth-policer

statement added in Junos OS Release 8.2.

Logical systems support introduced in Junos OS Release 9.3.
The

physical-interface-policer

statement introduced in Junos OS Release 9.6.

The

shared-bandwidth-policer

statement added in Junos OS Release 11.2.

Support at the

[edit dynamic-profiles ... firewall]

hierarchy level introduced in Junos OS

Release 11.4.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.

Description

Configure policer rate limits and actions. When included at the

[edit firewall]

hierarchy

level, the

policer

statement creates a template, and you do not have to configure a policer

individually for every firewall filter or interface. To activate a policer, you must include
the

policer-action

modifier in the

then

statement in a firewall filter term or on an interface.

Options

policer-action

—One or more actions to take:

•

discard

—Discard traffic that exceeds the rate limits.

•

forwarding-class

class-name

—Specify the particular forwarding class.

•

loss-priority

—Set the packet loss priority (PLP) to

low

medium-low

medium-high

high

policer-name

—Name that identifies the policer. The name can contain letters, numbers,

and hyphens (-), and can be up to 255 characters long. To include spaces in the
name, enclose it in quotation marks (“ ”). Policer names cannot begin with an
underscore in the form

__.*

then

—Actions to take on matching packets.

233

Chapter 18: Configuration Statements

Summary of Contents for EX9200 Series
































































































































































































































































Search results

Summary of Contents for EX9200 Series

Reviews:

Related manuals for EX9200 Series

Brands by name

Popular brands

Juniper EX9200 Series, Features Manual

Search results

Summary of Contents for EX9200 Series

Reviews:

Related manuals for EX9200 Series

Brands by name

Popular brands