manualshive.com logo in svg

Juniper EX9200 Series, Features Manual

The Juniper EX9200 Series product offers a comprehensive and high-performance switching solution. Seamlessly integrating into your network infrastructure, this advanced device is backed by a comprehensive "Features Manual" available for "free download" on our website. Explore the power of this product and get your manual from manualshive.com.

Share
Download
background image

Multifield Classification Limitations on M Series Routers . . . . . . . . . . . . . . . . . . . 119

Problem: Output-Filter Matching on Input-Filter Classification . . . . . . . . . . . 119
Workaround: Configure All Actions in the Ingress Filter . . . . . . . . . . . . . . . . . 120

Example: Configuring Multifield Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Example: Configuring and Applying a Firewall Filter for a Multifield Classifier . . . 127

Chapter 12

Policer Overhead to Account for Rate Shaping in the Traffic Manager . . . 135

Policer Overhead to Account for Rate Shaping Overview . . . . . . . . . . . . . . . . . . . 135
Example: Configuring Policer Overhead to Account for Rate Shaping . . . . . . . . . 135

Part 4

Configuring Three-Color Traffic Policers at Layer 3

Three-Color Policer Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Chapter 13

Three-Color Policer Configuration Guidelines . . . . . . . . . . . . . . . . . . . . . . . . 149

Platforms Supported for Three-Color Policers . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Color Modes for Three-Color Policers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Color-Blind Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Color-Aware Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Naming Conventions for Three-Color Policers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Chapter 14

Basic Single-Rate Three-Color Policers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Single-Rate Three-Color Policer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Example: Configuring a Single-Rate Three-Color Policer . . . . . . . . . . . . . . . . . . . 154

Chapter 15

Basic Two-Rate Three-Color Policers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

Two-Rate Three-Color Policer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Example: Configuring a Two-Rate Three-Color Policer . . . . . . . . . . . . . . . . . . . . . 162

Part 5

Configuring Logical and Physical Interface Traffic Policers at
Layer 3

Chapter 16

Two-Color and Three-Color Logical Interface Policers . . . . . . . . . . . . . . . . . 171

Logical Interface (Aggregate) Policer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Example: Configuring a Two-Color Logical Interface (Aggregate) Policer . . . . . . 172
Example: Configuring a Three-Color Logical Interface (Aggregate) Policer . . . . . 177

Chapter 17

Two-Color and Three-Color Physical Interface Policers . . . . . . . . . . . . . . . 185

Physical Interface Policer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Example: Configuring a Physical Interface Policer for Aggregate Traffic at a

Physical Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Part 6

Configuration Statements and Operational Commands

Chapter 18

Configuration Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
bandwidth-limit (Policer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
bandwidth-percent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
burst-size-limit (Policer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
color-aware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
color-blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
committed-burst-size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

Copyright © 2016, Juniper Networks, Inc.

vi

Traffic Policers Feature Guide for EX9200 Switches

Summary of Contents for EX9200 Series























































































































































































































































































Reviews:

No comments

Related manuals for EX9200 Series

Cabletron Systems MMAC-5FNB Overview And Setup Manual preview
MMAC-5FNB
Brand: Cabletron Systems Pages: 21
National Instruments PXIe-8240 Getting Started preview
PXIe-8240
Brand: National Instruments Pages: 9
National Instruments NI 9871 Operating Instructions Manual preview
NI 9871
Brand: National Instruments Pages: 24
National Instruments NI 9478 Operating Instructions Manual preview
NI 9478
Brand: National Instruments Pages: 32
National Instruments FIELDPOINT FP-1600 Operating Instructions Manual preview
FIELDPOINT FP-1600
Brand: National Instruments Pages: 8
Pima ZEL508 Installation Instructions preview
ZEL508
Brand: Pima Pages: 4
Tripp Lite N125-010-GY Specification Sheet preview
N125-010-GY
Brand: Tripp Lite Pages: 2
Compaq Proliant 800 Setup And Installation Manual preview
Proliant 800
Brand: Compaq Pages: 112
MikroTik RouterBOARD SXT 5HnD Quick Setup Manual And Warranty Information preview
RouterBOARD SXT 5HnD
Brand: MikroTik Pages: 2
Freescale Semiconductor FRDM-STBC-SA9500 Quick Reference Card preview
FRDM-STBC-SA9500
Brand: Freescale Semiconductor Pages: 2
Delta Electronics DTE-20T Instruction Sheet preview
DTE-20T
Brand: Delta Electronics Pages: 1
TRENDnet TW-100 Specifications preview
TW-100
Brand: TRENDnet Pages: 2
Weidmuller IE-SW-VL16-14TX-2SC Hardware Installation Manual preview
IE-SW-VL16-14TX-2SC
Brand: Weidmuller Pages: 17
Baldor Modbus Plus Installation And Operating Manual preview
Modbus Plus
Brand: Baldor Pages: 34
EMCIS LISN User'S Operating Manual preview
LISN
Brand: EMCIS Pages: 14
IBM CFFh Installation Manual preview
CFFh
Brand: IBM Pages: 34
B&B Electronics 4 Channel Input Buffer Board SDAIBB Product Manual preview
4 Channel Input Buffer Board SDAIBB
Brand: B&B Electronics Pages: 22
Kontron CP3002-RA User Manual preview
CP3002-RA
Brand: Kontron Pages: 98

Brands by name

Popular brands

Load more brands