Juniper EX3200 Series, Hardware Manual, Page: 141 / 310

CHAPTER 9
Pinout Specifications
• Console Port Connector Pinout Information on page 119
• USB Port Specifications for an EX Series Switch on page 120
•
RJ-45 Management Port Connector Pinout Information on page 121
•
RJ-45 Port, QSFP+ Port, SFP+ Port, and SFP Port Connector Pinout
Information on page 121
• RJ-45 to DB-9 Serial Port Adapter Pinout Information on page 126
•
Uplink Modules Connector Pinout Information for EX3200 Switches on page 126
Console Port Connector Pinout Information
The console port on a Junier Networks device is an RS-232 serial interface that uses an
RJ-45 connector to connect to a console management device. The default baud rate for
the console port is 9600 baud.
Table 47 on page 119 provides the pinout information for the RJ-45 console connector.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to a device, use a combination of
the RJ-45 to DB-9 female adapter and a USB to DB-9 male adapter. You
must provide the USB to DB-9 male adapter.
Table 47: Console Port Connector Pinout Information
Description Signal Pin
Request to send RTS Output 1
Data terminal ready DTR Output 2
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
119 Copyright © 2016, Juniper Networks, Inc.