10GE IOA
ES2-S1 10GE IOA
IOA label
•
1
Number of IOA ports
•
First supported: 7.0.1
•
Final supported: 14.0.x
Software release
•
40 W maximum
•
Full-height module
•
Uses a range of 10-gigabit small form-factor pluggable (XFP) transceivers to support
different modes and cable lengths.
Description
•
Ethernet (IEEE 802.3ae)
•
10Gb Base-SR/LR/ER/ZR
•
Port can operate in full duplex mode with an average data rate of 3.4 Gbps
Capability
•
See
E120 and E320 Module Guide, Appendix A, Module Protocol Support
for
information about the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
E320 router
•
E120 router
Model compatibility
•
ES2 4G LM
Line module compatibility
•
SRP-100
•
SRP-120
•
SRP-320
SRP module compatibility
•
Can be paired with an ES2 4G LM.
•
Must be installed in the same redundancy group as an ES2 4G LM and ES2–S1
REDUND IOA combination.
Line module redundancy
compatibility
•
Not applicable
Port redundancy support
•
One LC full duplex connector
•
Transmit power:
•
min: –7.3 dBm
•
max: –1.0 dBm
•
Receive input power:
•
min: –9.9 dBm
•
max: –1.0 dBm
•
See the following corresponding table (SR Fiber Optic Cabling) for cabling
requirements.
•
See
E120 and E320 Hardware Guide, Chapter 5, Cabling the Router
for more
information.
Cables and connectors (multimode
[SR])
Copyright © 2010, Juniper Networks, Inc.
68
E Series End-of-Life Module Guide
