FE-2 Module Combination (2 Ports)
FE-2
Line module label
FE-2 I/O
I/O module label
•
2
Number of I/O ports
•
First supported: 1.3.0
•
Last supported: 7.0.x
Software release
•
60 W
•
Fast Ethernet
Description
•
Non-ASIC
Type
•
IEEE 802.3 standards compliance
•
10/100Base-T
Capability
•
See
ERX Module Guide, Appendix A, Module Protocol Support
for information
about the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
ERX7xx models
•
ERX1410 router
Model compatibility
•
SRP-5G
•
SRP-5G+
•
SRP-10G
SRP module compatibility
•
Not applicable
Module redundancy support
•
Accepts up to two RJ-45 connectors.
•
For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
•
For 100-Mbps operation, use only CAT 5 UTP cable.
•
The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up
to 100 m (328 feet).
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
•
See
ERX Module Guide, Appendix B, Module LEDs
.
LEDs
•
See
Monitoring Ethernet Interfaces
in the
Configuring Ethernet Interfaces
chapter
of the
JunosE Physical Layer Configuration Guide
for Release 8.0.x and earlier.
Alarms, errors, and events
29
Copyright © 2010, Juniper Networks, Inc.
FE-2 Module Combination (2 Ports)
