FE-8 Module Combination (8 Ports) (128 MB)
This module combination is no longer supported because the line module has reached end-of-life. However, the
I/O module is still supported.
GE/FE
Line module label
FE-8 I/O
I/O module label
•
8
Number of I/O ports
•
First supported: 2.0.0
•
Final supported: 5.2.x
Software release
•
130 W
•
Fast Ethernet
Description
•
ASIC
Type
•
IEEE 802.3 standards compliance
•
10/100Base-T
Capability
•
See
ERX Module Guide, Appendix A, Module Protocol Support
for information
about the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
ERX7xx models
•
ERX14xx models
•
ERX310 router
Model compatibility
•
SRP-5G+
•
SRP-10G
•
SRP-40G
•
SRP-40G PLUS
•
SRP-SE10G
SRP module compatibility
•
Not applicable
Module redundancy support
•
RJ-45 connectors
•
For 10-Mbps operation, use CAT 3, 4, or 5 UTP cable.
•
For 100-Mbps operation, use only CAT 5 UTP cable.
•
The transmitted signal complies with IEEE 802.3/802.3u for cable lengths up
to 100 m (328 feet).
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
•
See
ERX Module Guide, Appendix B, Module LEDs
.
LEDs
•
See
Monitoring Ethernet Interfaces
in the
Configuring Ethernet Interfaces
chapter
of the
JunosE Physical Layer Configuration Guide
for Release 8.0.x and earlier.
Alarms, errors, and events
Copyright © 2010, Juniper Networks, Inc.
30
E Series End-of-Life Module Guide
