OC48/STM16 POS Single-Mode Short Reach Module Combination
OC48
Line module label
OC48 FRAME APS
I/O module label
•
1
Number of I/O ports
•
First supported: 4.1.x
•
Final supported: Not applicable
Software release
•
120 W
•
Unchannelized, concatenated OC48/STM16 for POS
Description
•
FFA ASIC
Type
•
OC48/STM16
•
HDLC framing
Capability
•
See “OCx/STMx POS and OC48 Modules” on page 99 for information about
the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
ERX1440 router
Model compatibility
•
SRP-40G
•
SRP-40G PLUS
SRP module compatibility
•
Not applicable
Module redundancy support
•
LC full duplex connector
•
Transmit power:
•
min: –10 dBm
•
max: –3 dBm
•
Center wavelength: 1310 nm
•
Receive input power:
•
min: –18 dBm
•
max: –3 dBm
•
Rated for 2 km (1.2 miles) of 9-micron core cable
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
•
See “Module LEDs” on page 109.
LEDs
•
See
Monitoring SONET/SDH Interfaces
in
JunosE Physical Layer Configuration
Guide, Chapter 3, Configuring Unchannelized OCx/STMx Interfaces
.
Alarms, errors, and events
79
Copyright © 2010, Juniper Networks, Inc.
OC48/STM16 POS Single-Mode Short Reach Module Combination