SRP-5G+ Module Combination (1-GB Memory)
SRP-5G+
Line module label
SRP I/O
I/O module label
•
7
Number of I/O ports
•
First supported: 4.1.3 or later 4.1.x release, 5.0.4 or later 5.0.x release, 5.1.2
or higher-numbered release, 5.2.0
•
Final supported: Not applicable
Software release
•
125 W
•
Switch route processor (5 Gbps)
•
Has a minimum of 1 GB of error checking and correction (ECC) memory with
a 1-GB nonvolatile storage (NVS) card.
•
The 512–MB version has reached end-of-life.
Description
•
Not applicable
Type
•
Ethernet (IEEE 802.3)
•
10/100Base-T
•
RS-232
Capability
•
Not applicable
Software features
•
ERX705 Broadband Services Router
Model compatibility
•
SRP-5G+
SRP module compatibility
•
1:1 redundancy
Module redundancy support
•
Terminal blocks
•
BNC, 75–ohm
•
Wire wrap posts
•
RJ-45
•
RS-232 (DB-9)
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more
information.
Cables and connectors
•
See “Module LEDs” on page 109.
LEDs
•
See
Monitoring Modules
in
JunosE System Basics Configuration Guide,
Chapter 6, Managing Modules
.
Alarms, errors, and events
81
Copyright © 2010, Juniper Networks, Inc.
SRP-5G+ Module Combination (1-GB Memory)
