OC3/STM1 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy
Module Combination
OCx/STMx POS
Line module label
OC3-4 I/O
SINGLE MODE
I/O module label
•
4
Number of I/O ports
•
First supported: 2.0.0
•
Final supported: Not applicable
Software release
•
120 W
•
Unchannelized, concatenated OC3/STM1 for POS
Description
•
EFA ASIC
Type
•
OC3/STM1
•
HDLC framing
Capability
•
See “OCx/STMx POS and OC48 Modules” on page 99 for information about
the layer 2 and layer 3 protocols and applications that this module combination
supports.
Software features
•
ERX7xx models
•
ERX14xx models
•
ERX310 router
Model compatibility
•
SRP-5G+
•
SRP-10G
•
SRP-40G
•
SRP-40G PLUS
•
SRP-SE10G
SRP module compatibility
•
1:N redundancy
•
NOTE:
Line module redundancy is not supported on the ERX310 router.
Module redundancy support
•
SC full duplex
•
Tx power:
•
min: –15 dBm
•
max: –8 dBm
•
Center wavelength: 1310 nm
•
Rx input power:
•
min: –31 dBm
•
max: –8 dBm
•
Rated for 15 km (9.3 miles) of 9-micron core cable
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
49
Copyright © 2010, Juniper Networks, Inc.
OC3/STM1 POS Single-Mode Intermediate Reach Without APS/MSP Redundancy Module Combination