Juniper BX7000, Hardware Manual, Page: 15 / 138

List of Technical Publications xv
About This Guide
List of Technical Publications
Table 3 on page xv lists the BX7000 Multi-Access Gateway documentation.
To configure and operate the BXOS software, use the configuration statements and operational
mode commands documented in the BXOS Configuration Guide and BXOS CLI Users Guide and
Command Reference .
Table 3: BX7000 Multi-Access Gateway Documentation
Obtaining Documentation
To obtain the most current version of all Juniper Networks technical documentation, see the
products documentation page on the Juniper Networks web site at: http://www.juniper.net/
To order a documentation CD, which contains this guide and other Juniper Networks technical
documents, contact your sales representative.
# (pound sign) Indicates a comment specified on the same line
as the configuration statement to which it applies.
rsvp {# Required for dynamic MPLS only}
[ ] (square brackets) Identify a level in the configuration hierarchy. [edit]
protocols {
ospf {
area 1.1.1.1 {
interface ge-1/0/1 {
admin-state enable;
}
}
}
}
Indention and braces ( { } ) Enclose a keyword and variable at specific
hierarchy levels. You can substitute one or more
values for the variable.
; (semicolon) Identifies a leaf statement at a configuration
hierarchy level.
gateway Refers to BX7000 Multi-Access Gateway
Convention Description Examples
Document Description
BX7000 Multi-Access Gateway Hardware
Guide
Provides a detailed hardware description of the gateway. This guide:
z
Explains how to unpack, install, mount, access, and maintain the gateway.
z
Explains the various hardware components such as power supply, chassis, and ports.
z
Provides troubleshooting of the hardware-related issues.
BXOS Configuration Guide Provides a detailed software description of the BXOS software. This guide:
z
Explains the configuration statements used to configure various properties of the
gateway.
z
Describes how to configure the basic system properties, protocols, interfaces,
pseudowires, and tunnels.
z
Explains statement hierarchies and parameters used in configuration.
BXOS CLI Users Guide and Command
Reference
Provides a detailed description of all the configuration mode and operational mode
commands. This guide:
z
Explains how to start the CLI and the components of the CLI.
z
Contains information about the commands used to set the gateway properties (set
commands) and the commands used to view the outputs (show commands).
BX7000 Multi-Access Gateway Getting
Started Guide
Provides an overview on installing the gateway. This guide:
z
Explains how to quickly set up the gateway.
z
Contains the basic steps to install the gateway and establish the basic gateway
connectivity.