F 8
0499
.G
B
6
Instructions for the servicing operations
6.1
Preparing the truck for servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
- Park the truck and render it safe (refer to chapter E, section 4.5).
- Disconnect the battery plug to prevent accidental starting of the truck (refer to
chapter D, section 4)
f
When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck. When lifting the truck,
the instructions contained in the chapter “Transportation and commissioning” have to
be observed.
6.2
Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the
servicing intervals indicated in the servicing checklist.
- Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
- Tighten all wheel-fixing bolts (1) using a wrench which is to be inserted through the
opening (2) of the collision guard (tightening torque 105Nm).
m
Remove the wrench after tightening the wheel-fixing bolts.
3
2
1
F 8
0499
.G
B
6
Instructions for the servicing operations
6.1
Preparing the truck for servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
- Park the truck and render it safe (refer to chapter E, section 4.5).
- Disconnect the battery plug to prevent accidental starting of the truck (refer to
chapter D, section 4)
f
When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck. When lifting the truck,
the instructions contained in the chapter “Transportation and commissioning” have to
be observed.
6.2
Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the
servicing intervals indicated in the servicing checklist.
- Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
- Tighten all wheel-fixing bolts (1) using a wrench which is to be inserted through the
opening (2) of the collision guard (tightening torque 105Nm).
m
Remove the wrench after tightening the wheel-fixing bolts.
3
2
1
F 8
0499
.G
B
6
Instructions for the servicing operations
6.1
Preparing the truck for servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
- Park the truck and render it safe (refer to chapter E, section 4.5).
- Disconnect the battery plug to prevent accidental starting of the truck (refer to
chapter D, section 4)
f
When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck. When lifting the truck,
the instructions contained in the chapter “Transportation and commissioning” have to
be observed.
6.2
Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the
servicing intervals indicated in the servicing checklist.
- Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
- Tighten all wheel-fixing bolts (1) using a wrench which is to be inserted through the
opening (2) of the collision guard (tightening torque 105Nm).
m
Remove the wrench after tightening the wheel-fixing bolts.
3
2
1
F 8
0499
.G
B
6
Instructions for the servicing operations
6.1
Preparing the truck for servicing and maintenance operations
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
- Park the truck and render it safe (refer to chapter E, section 4.5).
- Disconnect the battery plug to prevent accidental starting of the truck (refer to
chapter D, section 4)
f
When work has to be performed under the jacked-up truck, suitable measures must
be taken to prevent any dropping, tilting or slipping of the truck. When lifting the truck,
the instructions contained in the chapter “Transportation and commissioning” have to
be observed.
6.2
Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the
servicing intervals indicated in the servicing checklist.
- Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
- Tighten all wheel-fixing bolts (1) using a wrench which is to be inserted through the
opening (2) of the collision guard (tightening torque 105Nm).
m
Remove the wrench after tightening the wheel-fixing bolts.
3
2
1
Summary of Contents for ese 20
