Jungheinrich ese 20, Operating Instructions Manual

Page: 34 / 53

E 11
0799
.G
B
Counter-current braking
- While travelling, turn the controller (1) to the opposite direction.
The truck is braked by counter-current until it starts moving into the opposite direction.
A
The braking effect depends on the position of the controller.
4.4 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
- Pass the lifting device as far as possible under the load. Picking up long loads
crosswise is not permitted.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or
“Lowering”, the lifting or lowering
movement will be at a fixed speed.
Lifting
- Depress operating key “Lifting” (2) until
the required lifting height has been
reached.
Lowering
- Depress operating key “Lowering” (3);
the fork is lowered.
3 2
E 11
0799
.G
B
Counter-current braking
- While travelling, turn the controller (1) to the opposite direction.
The truck is braked by counter-current until it starts moving into the opposite direction.
A
The braking effect depends on the position of the controller.
4.4 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
- Pass the lifting device as far as possible under the load. Picking up long loads
crosswise is not permitted.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or
“Lowering”, the lifting or lowering
movement will be at a fixed speed.
Lifting
- Depress operating key “Lifting” (2) until
the required lifting height has been
reached.
Lowering
- Depress operating key “Lowering” (3);
the fork is lowered.
3 2
E 11
0799
.G
B
Counter-current braking
- While travelling, turn the controller (1) to the opposite direction.
The truck is braked by counter-current until it starts moving into the opposite direction.
A
The braking effect depends on the position of the controller.
4.4 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
- Pass the lifting device as far as possible under the load. Picking up long loads
crosswise is not permitted.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or
“Lowering”, the lifting or lowering
movement will be at a fixed speed.
Lifting
- Depress operating key “Lifting” (2) until
the required lifting height has been
reached.
Lowering
- Depress operating key “Lowering” (3);
the fork is lowered.
3 2
E 11
0799
.G
B
Counter-current braking
- While travelling, turn the controller (1) to the opposite direction.
The truck is braked by counter-current until it starts moving into the opposite direction.
A
The braking effect depends on the position of the controller.
4.4 Picking up and setting down loads
m
Before picking up a load, the driver has to make sure that it is correctly palletised and
that the capacity of the truck is not exceeded.
- Pass the lifting device as far as possible under the load. Picking up long loads
crosswise is not permitted.
m
Pick up the load, ensuring that it does not project excessively from the tips of the lifting
device (less than 50 mm).
Lifting and lowering
A
When operating the keys “Lifting” or
“Lowering”, the lifting or lowering
movement will be at a fixed speed.
Lifting
- Depress operating key “Lifting” (2) until
the required lifting height has been
reached.
Lowering
- Depress operating key “Lowering” (3);
the fork is lowered.
3 2