Jungheinrich ERE 120n, Operating Instructions Manual

Page: 63 / 93

0
709
.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard =
t
W A B C
Cold Store =
k
Brake 1.1 Check magnetic brake air gap.
t
Electrics 2.1 Test instruments, displays and control switches.
t
2.2 Test warning and safety device.
k t
2.3 Check fuse ratings.
t
2.4 Make sure wire connections are secure and check for
damage.
t
2.5 Test micro switch setting.
t
2.6 Check contactors and relays.
t
2.7 Frame leakage test
t
2.8 Test cable and motor attachments.
t
2.9 Check carbon brush wear, replace if necessary.
t
Power
supply 3.1 Visually inspect battery
k t
3.2 Check battery cable connections are secure, grease
terminals if necessary.
k t
3.3 Check acid density, acid level and battery voltage.
k t
Travel 4.1 Check motor suspension.
t
4.2 Check the transmission for noise and leakage.
t
4.3 Replace gear oil if service life exceeded (10,000 hours).
4.4 Check travel mechanism, adjust and lubricate if
necessary.
Check tiller recuperating function.
k t
4.5 Check wheels for wear and damage.
k t
4.6 Check wheel bearings and attachments.
t
Truck
design 5.1 Test the operator’s platform and check for damage.
t
5.2 Check chassis for damage and screw connections.
t
5.3 Check labels.
t
0
709
.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard =
t
W A B C
Cold Store =
k
Brake 1.1 Check magnetic brake air gap.
t
Electrics 2.1 Test instruments, displays and control switches.
t
2.2 Test warning and safety device.
k t
2.3 Check fuse ratings.
t
2.4 Make sure wire connections are secure and check for
damage.
t
2.5 Test micro switch setting.
t
2.6 Check contactors and relays.
t
2.7 Frame leakage test
t
2.8 Test cable and motor attachments.
t
2.9 Check carbon brush wear, replace if necessary.
t
Power
supply 3.1 Visually inspect battery
k t
3.2 Check battery cable connections are secure, grease
terminals if necessary.
k t
3.3 Check acid density, acid level and battery voltage.
k t
Travel 4.1 Check motor suspension.
t
4.2 Check the transmission for noise and leakage.
t
4.3 Replace gear oil if service life exceeded (10,000 hours).
4.4 Check travel mechanism, adjust and lubricate if
necessary.
Check tiller recuperating function.
k t
4.5 Check wheels for wear and damage.
k t
4.6 Check wheel bearings and attachments.
t
Truck
design 5.1 Test the operator’s platform and check for damage.
t
5.2 Check chassis for damage and screw connections.
t
5.3 Check labels.
t