Jungheinrich ERE 120n, Operating Instructions Manual

Page: 16 / 93

B 7
0
709
.GB
3.3 EN norms
Noise emission: 66 dB(A)
in accordance with EN 12053 as harmonised with ISO
4871.
Z
The noise emission level is calculated in accordance with standard procedures and
takes into account the noise level when travelling, lifting and when idle. The noise
level is measured at the driver’s ear.
Vibration: 0.67 m/s
2
In accordance with EN 13059.
Z
The vibration acceleration acting on the body in the operating position is, in
accordance with standard procedures, the linearly integrated, weighted acceleration
in the vertical direction. It is calculated when travelling over bumps at constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms that equipment complies with
tolerance levels for electromagnetic emissions and
resistance as well as static electricity discharge testing in
accordance with EN 12895 including the normative
procedures contained therein.
Z
No changes to electric or electronic components or their arrangement may be made
without the written agreement of the manufacturer.
3.4 Conditions of use
Ambient temperature
- operating at -10
°
C to 40
°
C
Z
Special equipment and authorisation are required if the truck is to be constantly used
in conditions of extreme temperature or air humidity fluctuations.
B 7
0
709
.GB
3.3 EN norms
Noise emission: 66 dB(A)
in accordance with EN 12053 as harmonised with ISO
4871.
Z
The noise emission level is calculated in accordance with standard procedures and
takes into account the noise level when travelling, lifting and when idle. The noise
level is measured at the driver’s ear.
Vibration: 0.67 m/s
2
In accordance with EN 13059.
Z
The vibration acceleration acting on the body in the operating position is, in
accordance with standard procedures, the linearly integrated, weighted acceleration
in the vertical direction. It is calculated when travelling over bumps at constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms that equipment complies with
tolerance levels for electromagnetic emissions and
resistance as well as static electricity discharge testing in
accordance with EN 12895 including the normative
procedures contained therein.
Z
No changes to electric or electronic components or their arrangement may be made
without the written agreement of the manufacturer.
3.4 Conditions of use
Ambient temperature
- operating at -10
°
C to 40
°
C
Z
Special equipment and authorisation are required if the truck is to be constantly used
in conditions of extreme temperature or air humidity fluctuations.