Jungheinrich ERE 120, Operating Instructions Manual

Page: 34 / 179

33
02.15 EN
C Transport and Commissioning
1 Lifting by crane
WARNING!
All persons involved in loading by crane must be trained
Incorrect crane loading procedures due to untrained personnel can cause the truck
to fall. There is a risk of injury to personnel and a risk of material damage to the truck.
X Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be taken
and appropriate safety measures applied.
WARNING!
Incorrect lifting by crane can result in accidents
Improper use or use of unsuitable lifting gear and can cause the truck to fall when
being lifted by crane.
Prevent the truck from hitting other objects during lifting, and avoid uncontrolled
movements. If necessary, secure the truck with guide ropes.
X
The truck should only be loaded by personnel trained in the use of lifting slings and
tools.
X Wear personal protective equipment (e. g. safety shoes, safety helmet, hi-vis
jacket, protective gloves, etc.) when loading by crane.
X Do not stand under suspended loads.
X
Do not enter or stand in a hazardous area.
X Always use lifting gear with sufficient capacity (for truck weight see truck rating
plate).
X Always attach the crane lifting gear to the prescribed strap points and prevent them
from slipping.
X Use the lifting slings only in the prescribed loading direction.
X Crane slings should be fastened in such a way that they do not come into contact
with any attachments when lifting.
Lifting the truck by crane
Requirements
– Park the truck securely, see "Parking
the truck securely" on page 65.
Tools and Material Required
– Lifting gear
– Crane lifting gear
Procedure
• Secure the lifting slings to the strap
points (15).
15
15
15
15