Jungheinrich ERE 120, Operating Instructions Manual

Page: 28 / 179

27
02.15 EN
4.5 EN norms
Continuous sound pressure level
– ERE 120 / ERE C20: 73 dB(A)
in accordance with EN 12053 as harmonised with ISO 4871.
Z
The continuous sound pressure level is calculated according to standard
procedures and takes into account the sound pressure level when driving, lifting
and idling. The sound pressure level is measured at the driver’s ear.
Z
Noise levels can fluctuate depending on the floor composition and wheel lining.
Vibration
– ERE 120 / ERE C20: 0,94 m/s²
in accordance with EN 13059
Z
The vibration acceleration acting on the body in its operating position is the linearly
integrated, weighted acceleration in the vertical axis according to the standard. It is
calculated when travelling over thresholds at constant speed. These recordings
were taken on a single occasion and must not be confused with the human
vibrations of the "2002/44/EC/Vibrations" operator directive. The manufacturer
offers a special service to measure these human vibrations, see "Human vibration
measurement" on page 148.
Electromagnetic compatibility (EMC)
The manufacturer confirms that the truck adheres to the limits for electromagnetic
emissions and resistance as well as the static electricity discharge test in accordance
with EN 12895 as well as the standardised instructions contained therein.
Z
No changes to electric or electronic components or their arrangement may be
made without the written agreement of the manufacturer.
WARNING!
Medical equipment can be damaged by non-ionised radiation
Electrical equipment on the truck emitting non-ionised radiation (e.g. wireless data
transmission) can affect operators' medical equipment (pacemakers, hearing aids
etc.) and result in malfunctions. Consult a doctor or the manufacturer of the medical
equipment to clarify whether it can be used near the industrial truck.