Jungheinrich EME 112, Operating Instructions Manual

Page: 15 / 65

1001
.GB
B 6
3.4 EN standards
Continuous sound level: 66 dB(A)
according to prEN 12053 as stipulated in ISO 4871
A
The continuous sound level is a value averaged according to standard regulations,
taking the sound pressure level into account when driving, lifting and idling. The
sound pressure level is measured at the ear.
Vibration: 0.30 m/s
2
according to prEN 13059
A
The swinging acceleration acting on the body in its operating position is, according to
standard regulations, the linear integrated, weighted acceleration in the vertical pla-
ne. It is determined by driving over bumps with a constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the limit va-
lues for electromagnetic emission and interference im-
munity as well as testing of static electricity discharge ac-
cording to prEN 12895 and the references to other
standards contained therein.
A
Electrical or electronic components and their arrangement may only be modified after
written approval by the manufacturer has been obtained.
3.5 Conditions for application
Ambient temperature
- during operation: 0 ° C to 40 ° C
A
Industrial trucks must be specially equipped and approved for continuous use in en-
vironments with temperatures below 5°C or in cold stores respectively with extreme
temperatures or humidity changes.
1001
.GB
B 6
3.4 EN standards
Continuous sound level: 66 dB(A)
according to prEN 12053 as stipulated in ISO 4871
A
The continuous sound level is a value averaged according to standard regulations,
taking the sound pressure level into account when driving, lifting and idling. The
sound pressure level is measured at the ear.
Vibration: 0.30 m/s
2
according to prEN 13059
A
The swinging acceleration acting on the body in its operating position is, according to
standard regulations, the linear integrated, weighted acceleration in the vertical pla-
ne. It is determined by driving over bumps with a constant speed.
Electromagnetic compatibility (EMC)
The manufacturer confirms compliance with the limit va-
lues for electromagnetic emission and interference im-
munity as well as testing of static electricity discharge ac-
cording to prEN 12895 and the references to other
standards contained therein.
A
Electrical or electronic components and their arrangement may only be modified after
written approval by the manufacturer has been obtained.
3.5 Conditions for application
Ambient temperature
- during operation: 0 ° C to 40 ° C
A
Industrial trucks must be specially equipped and approved for continuous use in en-
vironments with temperatures below 5°C or in cold stores respectively with extreme
temperatures or humidity changes.