D 3
1001
.GB
3.2
Charging battery with 24 VDC (lorry)
– Connect the charger cable (
o
) with the 24 VDC connection (4). A green flash-light
of the LED (3) indicates that the battery charger is connected to the mains and the
battery is being charged.
– Charge the battery until LED (3) is steady on (green).
– Disconnect the 24 VDC connection.
A
During charging, all electrical functions are disconnected (electronic drive inhibit).
In this state, the truck cannot be operated.
Charging times
Depending on the state of discharge, charging the battery can take up to 6 h.
Partial charging
The charger is designed in such a manner that it automatically adapts itself when
charging partially charged batteries. This keeps battery wearing down.
m
Red flashing of LED (3) means that the battery is defective or the charging circuit has
been interrupted. When operating the charger via the truck supply system the battery
cannot always be fully charged. Recharge (from mains) at least once per week.
f
If the equalising charge on the truck is performed via mains connection
(115 V / 230 V) the mains connection must be equipped with an FI safety switch!
4
3
D 3
1001
.GB
3.2
Charging battery with 24 VDC (lorry)
– Connect the charger cable (
o
) with the 24 VDC connection (4). A green flash-light
of the LED (3) indicates that the battery charger is connected to the mains and the
battery is being charged.
– Charge the battery until LED (3) is steady on (green).
– Disconnect the 24 VDC connection.
A
During charging, all electrical functions are disconnected (electronic drive inhibit).
In this state, the truck cannot be operated.
Charging times
Depending on the state of discharge, charging the battery can take up to 6 h.
Partial charging
The charger is designed in such a manner that it automatically adapts itself when
charging partially charged batteries. This keeps battery wearing down.
m
Red flashing of LED (3) means that the battery is defective or the charging circuit has
been interrupted. When operating the charger via the truck supply system the battery
cannot always be fully charged. Recharge (from mains) at least once per week.
f
If the equalising charge on the truck is performed via mains connection
(115 V / 230 V) the mains connection must be equipped with an FI safety switch!
4
3
Summary of Contents for EME 112
