Jungheinrich EJC B14, Operating Instructions Manual

Page: 59 / 107

03
.1
1
E
N
58
8.1.2 Replacing the forks
WARNING!
Unsecured forks can cause injury
You can injure your legs when replacing the forks.
X
Never pull the forks towards your body.
X Always push the forks away from your body.
X
Secure heavy forks with lifting slings and a crane before pushing them down from
the fork carriage.
X
After replacing the forks fit the retaining bolts (54) and make sure the bolts are
seated correctly. Retaining bolt torque: 70 Nm.
Replacing the forks
Requirements
– Load handler lowered and forks not touching the ground.
Procedure
• Disassemble the retaining screw (54).
• Loosen the fork stop (58).
• Carefully push the forks up to the middle of the fork carriage and lift them out over
the recess.
The forks are now dismantled from the load carriage and can be replaced.
CAUTION!
Use only the 2A forks.
58
54
03
.1
1
E
N
58
8.1.2 Replacing the forks
WARNING!
Unsecured forks can cause injury
You can injure your legs when replacing the forks.
X
Never pull the forks towards your body.
X Always push the forks away from your body.
X
Secure heavy forks with lifting slings and a crane before pushing them down from
the fork carriage.
X
After replacing the forks fit the retaining bolts (54) and make sure the bolts are
seated correctly. Retaining bolt torque: 70 Nm.
Replacing the forks
Requirements
– Load handler lowered and forks not touching the ground.
Procedure
• Disassemble the retaining screw (54).
• Loosen the fork stop (58).
• Carefully push the forks up to the middle of the fork carriage and lift them out over
the recess.
The forks are now dismantled from the load carriage and can be replaced.
CAUTION!
Use only the 2A forks.
58
54