Jungheinrich EJC B14, Operating Instructions Manual

Page: 45 / 107

03
.1
1
E
N
44
3.3 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load / load
handler is dangerous and is strictly prohibited.
X
Always park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
X
Always fully lower the mast and forks.
X
Select a place to park where no other people are at risk of injury from lowering
forks.
Parking the truck securely
Procedure
• Fully lower the load handler.
• Turn off the key switch and remove the key.
• For CanCode, press the O key.
• Press the Emergency Disconnect.
The truck is parked.
3.4 Battery discharge monitor
Z
The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the residual capacity falls below the required level, lifting is inhibited. An alternating
display (51) appears. Lifting is only released when the battery connected is at least
70% charged.
03
.1
1
E
N
44
3.3 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load / load
handler is dangerous and is strictly prohibited.
X
Always park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
X
Always fully lower the mast and forks.
X
Select a place to park where no other people are at risk of injury from lowering
forks.
Parking the truck securely
Procedure
• Fully lower the load handler.
• Turn off the key switch and remove the key.
• For CanCode, press the O key.
• Press the Emergency Disconnect.
The truck is parked.
3.4 Battery discharge monitor
Z
The standard setting for the battery discharge indicator / discharge monitor is
based on standard batteries. When using maintenance-free or special batteries the
display and cutout points of the battery discharge monitor must be set by
authorised specialist personnel. If this adjustment is not made the battery may
become damaged through excessive depletion.
If the residual capacity falls below the required level, lifting is inhibited. An alternating
display (51) appears. Lifting is only released when the battery connected is at least
70% charged.