Jungheinrich EJC B14, Operating Instructions Manual

Page: 49 / 107

03
.1
1
E
N
48
4.2.3 Travel
CAUTION!
X Do not drive the truck unless the panels are closed and properly locked.
X
When travelling through swing doors etc. make sure that the doors do not activate
the collision safety button.
Requirements
– Start up the truck, (see "Starting up the truck" on page 42)
Procedure
• Set the tiller (7) to the travel range (F) and press the travel switch (3) in the desired
direction (fwd. or rev.).
• Control the travel speed with the travel switch (3).
Z
When the travel switch is released it automatically returns to its original position.
The brakes are released and the truck moves in the selected direction.
Z
Preventing the truck from “rolling downhill”:
If the truck rolls backwards on an incline the controller detects the situation and the
brake applies automatically after a short movement.
0
R
R
V
B
F
B
V
8
3
7
5
03
.1
1
E
N
48
4.2.3 Travel
CAUTION!
X Do not drive the truck unless the panels are closed and properly locked.
X
When travelling through swing doors etc. make sure that the doors do not activate
the collision safety button.
Requirements
– Start up the truck, (see "Starting up the truck" on page 42)
Procedure
• Set the tiller (7) to the travel range (F) and press the travel switch (3) in the desired
direction (fwd. or rev.).
• Control the travel speed with the travel switch (3).
Z
When the travel switch is released it automatically returns to its original position.
The brakes are released and the truck moves in the selected direction.
Z
Preventing the truck from “rolling downhill”:
If the truck rolls backwards on an incline the controller detects the situation and the
brake applies automatically after a short movement.
0
R
R
V
B
F
B
V
8
3
7
5