47
03
.1
1
E
N
4.2
Emergency Disconnect, Travel, Steering, Braking
4.2.1 Emergency Disconnect
Applying the Emergency Disconnect
Procedure
CAUTION!
Accident risk
The operation of the Emergency Disconnect switch must not be affected by any
objects placed in its way.
Z
Do not use the Emergency Disconnect (8) as a service brake.
• Press the Emergency Disconnect (8).
All electrical functions are deactivated. The truck brakes to a halt.
Releasing the Emergency Disconnect
Procedure
• Pull the Emergency Disconnect (8) to unlock it.
All electrical functions are enabled and the truck is operational again (assuming the
truck was not operational before the Emergency Disconnect was pressed).
For CanCode the truck remains switched off.
4.2.2 Automatic braking
Z
When the tiller is released it automatically sets itself to the upper brake zone (B)
and automatic braking ensues.
WARNING!
X
If the tiller moves slowly or not at all to the upper brake zone, the truck must be
taken out of service until the cause of this fault is be rectified. Replace the gas
pressure spring if necessary.
47
03
.1
1
E
N
4.2
Emergency Disconnect, Travel, Steering, Braking
4.2.1 Emergency Disconnect
Applying the Emergency Disconnect
Procedure
CAUTION!
Accident risk
The operation of the Emergency Disconnect switch must not be affected by any
objects placed in its way.
Z
Do not use the Emergency Disconnect (8) as a service brake.
• Press the Emergency Disconnect (8).
All electrical functions are deactivated. The truck brakes to a halt.
Releasing the Emergency Disconnect
Procedure
• Pull the Emergency Disconnect (8) to unlock it.
All electrical functions are enabled and the truck is operational again (assuming the
truck was not operational before the Emergency Disconnect was pressed).
For CanCode the truck remains switched off.
4.2.2 Automatic braking
Z
When the tiller is released it automatically sets itself to the upper brake zone (B)
and automatic braking ensues.
WARNING!
X
If the tiller moves slowly or not at all to the upper brake zone, the truck must be
taken out of service until the cause of this fault is be rectified. Replace the gas
pressure spring if necessary.
Summary of Contents for EJC B14
