D*AP8 MAP
75
Setup GUI – EVENTS – Events – Preset Events
A Preset Event is a group of presets you may load on one occasion to the On Air parameters of function
blocks. When executing such an event you may for example change the routing, the Dolby processing, the
metadata set-up etc. by simply assigning the individual preset of your choice to the system, to an interface,
to the routing, to the program path or even to the measurement. This picture shows an excerpt from the
Preset Events pane where a few presets are pre-selected for the event: "AutoDecPstE". Due to the number
of function blocks the screen shot is split in two columns:
Pull down list of all presets available for the
Decoder / Emulation function block.
If no preset is selected you will get a dash in the drop down field. Some function blocks (e.g. AES I/O) even
have no preset assigned at all at the moment so there is no drop down box.