15
WLAN Access Point · Configuration
Reset delivery status
A reset resets the WLAN Access Point to the delivery status of the last firmware installed.
A reset can be made as follows:
-
with the aid of a Reset magnet (ref.-no. PL MAGNET 01) – hardware-dependent
(see page 16 et seq.)
-
via web browser (on the software side for all devices)
When resetting via web browser, proceed as follows:
•
To do this, go to the menu item
System > Backup / Software Update
to the
sub-item
Actions
as described or shown above.
If you reset the configuration in the following, all individual definitions
regarding passwords, language settings etc. will be lost !
•
Click on
Perform reset
(L).
- This process must not be interrupted and takes about 2 to 3 minutes.
Flash new firmware image
The latest firmware can be downloaded from our website in the download area. Now pro-
ceed as follows:
•
Save the file on your PC.
•
Change to the submenu
Actions > Flash new firmware image
via the menu
System > Backup / Software Update
as shown.
•
Click on
Select file
and select the file.
Important:
-
With a ‘large’ software update (e.g. from 4.x.x.x to 5.x.x.x), no settings can be
applied. Be sure to disable the
Keep configuration
option.
-
With a ‘small’ software update within the respective ‘version’ (e.g. 4.0.0.0 and
4.0.0.1), however, all settings in the device can be retained after the update,
provided that the check mark ‘Retain configuration’ was set.
•
If you want to keep the current configuration, confirm this.
•
Click on
Flash image
(M).
- Up to version 5.0.0.0, all variants are consistently backwards compatible.
•
Click on
Continue
in the following dialogue.
- The process must not be interrupted and takes about 2 to 3 minutes.
•
After successfully updating the firmware, you must log in again.
Tip
The file has the suffix
.bin and is named
e.g. for version 5.0:
acw-jg-5000.bin
M
Summary of Contents for WLAN-AC-POE-UAE
Page 2: ...2...
