33
WLAN Access Point · Advanced functions
Enable timer
-
Here you can generally switch the timer functionality off and on.
LED display
-
The LED display is independent of the timer functions and only reflects the status of
the internal interfaces.
Each of the changes you have made must be saved for acceptance or use.
In the second category ‘Time entries’, you can set the timer individually.
•
Click
Add
time entries to define the timer settings.
-
In this case, one switching process can be defined per block of 4 (for time entries)
or per line (for public holiday).
To simplify matters, six predefined time periods are offered in the drop-down menu under
When
:
daily
,
weekdays
,
monthly
,
once
,
working days
,
weekends
•
Select the desired time span and enter the desired combination of time, day, date,
WLAN / LAN validity.
- The time format is: HH : MM.
- It is recommended to define the usually desired ‘opposite’ circuit (via the
Add
command) in the following block of four.
•
Delete unwanted time entries via the corresponding command.
Note:
The time is constantly
updated to the second
according to the set-
tings under
System >
General Setup.
T
Summary of Contents for WLAN-AC-POE-UAE
Page 2: ...2...
