11
WLAN Access Point · Configuration
Change the password for the web interface
Increase access protection by setting an individual password.
•
To do this, switch to the password entry via the menu
System / Administration
.
By clicking on the green arrows, you can view the previous password.
•
Enter a new password – use only
letters
(without spaces) and
numbers
.
•
Enter the new password in the second field to confirm.
•
Save it using
Save & Apply.
Change the password for WLAN
Increase access protection by setting an individual WLAN password.
•
To do this, go to the Interface Configuration submenu via the menu
Network>
Wireless > Accesspoint
.
•
Call up the second tab
WLAN encryption
(see figure, G).
•
Select the type of
encryption
.
Select the WPA2-PSK setting as the currently
most secure encryption variant..
•
Set the
encryption algorithm
.
Standard setting is
auto
•
In the
key
entry make the previous password visible by clicking on the green arrows
- this is factory set to wireless123 (see figure).
•
Enter a new password of
at least eight
characters – use
numbers
and
letters
(without spaces).
•
Write down the new WLAN password (see table ‘Factory settings’ on page 44).
•
Save all three settings using
Save & Apply.
G
Summary of Contents for WLAN-AC-POE-UAE
Page 2: ...2...
