KNX
IP Central Unit
Ref.-no.: IPZ 1000 REG
Operating Instructions
IP Central Unit
1. System information
This device is a product of the
instabus
EIB system and complies with
EIBA directives. Detailed technical knowledge obtained in
instabus
training courses is a prerequisite to proper understanding. The
functionality of this device depends on the software. Detailed information
on loadable software and attainable functionality as well as the software
itself can be obtained from the manufacturer’s product database.
Planning, installation and commissioning of the unit is done by means of
EIBA-certified software. The latest version of the product database and of
the technical descriptions are always available in the Internet under
www.jung.de
2. Safety warnings
Attention
Electrical equipment must be installed and fitted by qualified
electricians only and in strict observance of the relevant accident
prevention regulations. Failure to observe any of the installation
instructions may cause fire and other hazards
Important:
The present installation instructions are to give a first
overview of the use and information on the connection of the IP central
unit. A detailed description of the product and configuration of the
necessary devices can be found in the respective EIB product
documentation.
3. Function
The IP central unit is the interface between the Ethernet LAN (
L
ocal
A
rea
N
etwork) and the
instabus
EIB, and in future also the
e2i
system. With an
Ethernet connection, the user has access from the local PC of his LAN or
also via the Internet to his
instabus
EIB or to his
e2i
system. The Internet
connection can be established via DSL, LAN (RJ45-port) or also with a
V90 modem / ISDN-adapter (RS232 port). The IP central unit acts as a
server and can be comfortably operated as a central control, reporting
Stand: Aug-07 3
25 491 03
