KNX
IP Central Unit
Ref.-no.: IPZ 1000 REG
6. Cap
Slide the cap with the bus wires at the bottom over the bus terminal (fig.
A) until it is heard to engage.
To remove the cap, push sideways and withdraw (fig. B).
The cap is available as an accesory (Art. No. 2050 K)
7. Technische Daten
Supply :
21 – 32 V DC, (e.g. via
unchoked EIB voltage output)
Power consumption :
ca. 3 W without
e2i
ca. 6 W with
e2i
Connections
24 V supply :
screw terminals
and a-b trigger input
0.5 –4 mm
2
single wire or
0.34 – 4 mm
2
stranded wire
without ferrule or
0.14– 2.5 mm
2
stranded wire with
ferrule
instabus
EIB :
instabus
connecting terminal
Ethernet / LAN :
RJ45 socket
(10/100 MBit/s Fast Ethernet)
Serial RS232 :
SUB-D plug, 9-pole
e2i
(presently not supported)
external :
e2i
plug, 4-pole
internal :
e2i
strip connector, 6-pole
Ambient temperature :
-5 °C … +45 °C
Storage temperature :
-25 °C … +70 °C
Installation width :
144 mm (8 modules)
Technical specifications subject to change
6
