background image

10

 

Operating Manual: FRWM-IP-GATE - IP-Gateway

EN

2.3  Unintended use

The device must not be used for the  

following purposes:

 

Communication with smoke alarm 

devices from another manufacturer

 

Fire alarm system as specified 

in EN 54 and DIN 14675

 

Testing of the alarm function by 

intentionally triggering alarms in 

excess of the afore-mentioned 

frequencies. If there are more 

than 3 smoke alarms per year, 

this can block the notification 

function of the gateway

 

Monitoring rooms with 

foreseeable regular/frequently 

occurring smoke development

 

Any use that is not expressly 

described as permitted in 

this operating manual
Exceptions to the above require a writ-

ten agreement with the manufacturer.

2.4  General safety information

The general safety information describes

all measures to ensure safety thematically

and applies at all times.

General information

Neither the gateway nor the smoke alarm 

devices connected to it directly transmit 

an alarm to an official entity that can pro-

vide help (fire brigade). The gateway is 

subject to strict quality controls during 

production. In addition, a function test is 

performed before delivery. Nevertheless, 

unexpected malfunctions can occur. The 

manufacturer is not responsible for timely 

forwarding of an alarm and accordingly 

accepts no liability if an alarm is not or 

forwarded or not promptly forwarded 

to the user (e.g., failure of the Internet 

connection).

Summary of Contents for FRWM-IP-GATE























































Reviews: