20
Operating Manual: FRWM-IP-GATE - IP-Gateway
EN
(1)
Remove splint pin on the red activa-
tion button of the smoke alarm device.
(2)
Push activation button flush.
Short acoustic signal
Radio group query:
(3)
Press the radio button on the
smoke alarm device with the splint
pin (activation backup) until the
signal LED begins to light up, then
release it.
Starting the learning mode on the
smoke alarm device:
5
Radio group is in learning mode for
10 minutes.
(4)
Add further smoke alarm devices
one after another to the radio group.
To do this, press in the activation
buttons on the respective smoke
alarm devices so that they are flush.
With every newly added device to the
radio group, the learning mode dura-
tion resets to a further 10 minutes.
Integrating the gateway
After you have activated the desired num-
ber of smoke alarm devices (max. 14), you
need to integrate the gateway into the
radio group:
(1)
Connect the USB cable to the gate-
way and restore the power supply
to the gateway.
While the gateway is starting up the
LEDs of the gateway button (B) and
the radio button (A) become active
in that order:
Gateway starts:
(B)
Summary of Contents for FRWM-IP-GATE
Page 1: ...FRWM IP GATE IP Gateway Operating Manual...
Page 53: ......