o
Stop or adjust Venetian blind: Short press of right or left button.
Operating push-button actuator
o
Press the right or left button: The load is switched on for the duration of the button-press.
i
The maximum actuation length is 60 seconds.
Recalling scenes
o
Press the scene button briefly.
Actuators switch to the saved scene values.
Changing scene
o
Press the scene button briefly.
Actuators switch to the saved scene value.
o
Set new scene values.
o
Press scene button for longer than 4 seconds.
Actuators first switch to the saved scene value and save the new scene value after
4 seconds.
Dimming a scene
The dimmer actuators in a recalled scene can be dimmed, although the brightness differences
between the individual dimmer actuators remain.
The master dimming function must be assigned to a rocker (see chapter 4.5. Setting up the
hand-held transmitter).
o
Recall a scene - either using the scene menu or a function key.
o
Dim brighter: Long press of the left master dimming button.
o
Dim darker: Long press of the right master dimming button.
4.4 Operating the hand-held transmitter
Operating actuators with the channel menu
The "Channels" menu offers direct access to all 24 hand-held transmitter channels, irrespective
of whether or not actuators are connected.
o
Open the main menu.
o
Select "Channels" and press
OK
.
o
Select the desired hand-held transmitter channel.
o
Switch on: Brief press of
~
button.
o
Switch off: Brief press of
}
button.
o
Toggle: Brief press of
OK
button.
o
Dim brighter: Long press of
~
button.
o
Dim darker: Long press of
}
button.
o
Move Venetian blind downwards: Long press of
}
button.
o
Move Venetian blind upwards: Long press of
~
button.
o
Stop Venetian blind: Short press of
}
or
~
button.
o
Return to main menu: Press the left menu button "Back".
Operating actuators with the list menu
When set up, lists can contain selected hand-held transmitter channels or scenes and be given
sensible names according to the requirements of the operator (see chapter 4.5. Setting up the
hand-held transmitter).
o
Open the main menu.
o
Select the desired list in the menu and press
OK
.
o
Select the desired hand-held transmitter channel. Operation takes place with the
}
and
~
buttons.
5/18
82582333
J0082582333
29.03.2017
eNet radio hand-held transmitter with display, 24-gang
