The hand-held transmitter signals the number of actuator channels found.
o
Press the right menu button "Teach".
The status LED lights up for approx. 3 seconds. The actuator channels are deleted from
the scene. The hand-held transmitter and actuator exit the programming mode
automatically.
Resetting a scene
All the connections of the scene channel to actuators are disconnected.
i
The connections in the actuators are preserved and must be deleted separately.
o
Open the main menu.
o
Select "Programming" and press
OK
.
o
Select the desired scene and press
OK
.
o
Select "Scenes" and press
OK
.
o
Select "Reset scene" and press
OK
.
A security query is displayed, asking whether the operation should be continued or not.
o
Cancel operation: Press the left menu button "No".
- or -
o
Continue operation: Press the right menu button "Yes".
The message "Reset executed" appears in the footer. All the actuators connected to the
selected scene are disconnected.
Setting up lock-out protection
The lock-out protection function moves the blind/shutter to the top end position for selected
Venetian blind actuators – e.g. for patio or balcony doors and locks further operation.
o
Connect two scenes for activating and deactivating the lock-out protection with the desired
Venetian blind actuator (see chapter Connecting a scene channel with an actuator).
o
Give the scene a suitable name (see chapter Renaming a scene).
o
Open the main menu.
o
Select "Scenes" and press
OK
.
o
Select the scene for activating lock-out protection and press the right menu button "Open".
o
Select "Lock-out prot. ON" and press
OK
.
The entry is indicated with
>
.
o
Press the left menu button "Back".
o
Select the scene for deactivating lock-out protection and press the right menu button
"Open".
o
Select "Lock-out prot. OFF" and press
OK
.
The entry is indicated with
>
.
o
Press the left menu button "Back".
The lock-out protection functions are indicated with
ĝ
.
o
Exiting Scenes menu: Press the left menu button "Back".
Setting up the channel lock function
A channel lock function sets values, states or Venetian blind positions and then locks automatic
or manual operation until an enable is performed.
o
Connect two scenes for activating and deactivating the channel lock with the desired
actuators (see chapter Connecting a scene channel with an actuator).
o
Give the scene a suitable name (see chapter Renaming a scene).
o
Set the switching dimmer and Venetian blind actuators with the desired values for the
restrained situation.
o
Open the main menu.
o
Select "Scenes" and press
OK
.
13/18
82582333
J0082582333
29.03.2017
eNet radio hand-held transmitter with display, 24-gang
