o
Select the previously-created scene for activating the function and press the right menu
button "Open".
o
Select "Channel lock ON" and press
OK
.
The entry is indicated with
>
.
o
Select "Store scene" and press
OK
.
o
Press the left menu button "Back".
o
Select the previously-created scene for deactivating the function and press the right menu
button "Open".
o
Select "Channel lock OFF" and press
OK
.
The entry is indicated with
>
.
o
Press the left menu button "Back".
The channel lock functions are indicated with
ĝ
.
o
Exiting Scenes menu: Press the left menu button "Back".
Preparing a hand-held transmitter for operation with an eNet server
The hand-held transmitter must be connected with the server for installations commissioned
with the eNet server.
o
Open the main menu.
o
Select "Programming" and press
OK
.
o
Select "Advanced startup" and press
OK
.
"Teaching mode" is activated and the LED flashes red.
o
Start reading in of devices on the eNet server.
o
If the eNet server requests actuation of a button, select "Send confirmation" and press
OK
.
o
Once programming of the hand-held transmitter by the eNet server has been completed,
select "Teaching mode" again and press the right menu button "On/Off".
The hand-held transmitter signals "End of Teaching mode" in the footer.
Resetting the hand-held transmitter to the default setting
All the connections to actuators are disconnected. The parameters are reset to the default
setting.
i
The connections in the actuators are preserved and must be deleted separately.
o
Open the main menu.
o
Select "Programming" and press
OK
.
o
Select "Settings" and press
OK
.
o
Select "Default setting" and press
OK
.
In the text area, the message "Reset device?" appears.
o
Press the right menu button "Yes".
The message "Executing reset" appears in the footer. The connections of all the hand-held
transmitter and scene channels to all the actuators are disconnected. The hand-held
transmitter returns to the main menu.
6 Appendix
Remove empty batteries immediately and dispose of in an environmentally friendly
manner. Do not throw batteries into household waste. Consult your local authorities
about environmentally friendly disposal. According to statutory provisions, the end
consumer is obligated to return used batteries.
6.1 Technical data
Rated voltage
DC 3.6 V
Battery type
1×Lithium LIR 2477
Dimensions L×W×H
131×67×17 mm
Ambient temperature
-5 ... +45 °C
14/18
82582333
J0082582333
29.03.2017
eNet radio hand-held transmitter with display, 24-gang
