background image

eNet radio hand-held transmitter with display, 24-gang

eNet radio hand-held transmitter with display, 24-gang

Art. No. : FMHSD24

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled
persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.

Risk of explosion! Do not throw button cells into a fire.

Risk of explosion! Do not replace a used battery with a primary battery, e.g. lithium
button cell.

Fire hazard! Operation exclusively with the power supplies listed under accessories

The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.

These instructions are an integral part of the product, and must remain with the end
customer.

2 Device components

Figure 1: View

(1) LC display
(2) Menu buttons
(3) Navigation buttons
(4) Function keys
(5) Charging connection
(6) Battery compartment (Rear side)
(7) Status LED

1/18

82582333
J0082582333

29.03.2017

Summary of Contents for FMHSD24



















Reviews: