o
Remove slide switch (4).
o
Unscrew locking screw (10) all the way (picture 5) and put it on the back of the slide switch
(9) (picture 4).
o
Snap on slide switch and set desired operating mode.
i
The slide switch can only be locked in automatic mode.
Setting the Continuous off operating mode
o
Move the operating mode switch left to the
O
position (picture 4).
The lighting is switched off permanently.
If a dimmer insert is used, then dimming will take place and the lighting will switch off after
approx. 30 seconds.
i
With Continuous off, switch-on via an extension is not possible.
Setting the Continuous on operating mode
o
Move the operating mode switch right to the
I
position (picture 4).
The lighting remains permanently switched on at the current brightness. If the lighting is
switched off, then the switch-on brightness is set.
i
Switching or dimming via an extension is not possible.
Setting the Automatic operating mode
o
Move slide switch to the centre position (picture 4).
The lighting switches automatically, operation via an extension is possible.
Setting the brightness threshold
picture 6: Adjuster under slide switch
The brightness threshold is infinitely adjustable in a range from approx. 0 to 80 lux and
day operation
3
. In so doing, the
3
symbol stands for brightness-independent switching and the
2
symbol for switching in case of darkness.
o
Remove slide switch (4).
o
Turn the adjuster (6) to the required position (picture 6).
i
Should the motion detector no longer react to movements to be detected in Night mode,
2
setting, turn the adjuster back somewhat towards
3
.
o
Snap on slide switch.
6/14
32540233
J:0082540233
26.07.2010
Light Management
Automatic switch 180° 1.10 m
