11 / 13
JUNG ANTRIEBSTECHNIK U. AUTOMATION GMBH
♦
Felsweg 18
♦
35435 Wettenberg
♦
Germany
Tel.: +49-(0)641-48017-0
♦
Fax: +49-(0)641-48017-15
♦
eMail: [email protected]
♦
www.ja2-gmbh.de
4.3
Dismantling & Assembly of Linear Motor Modules
Assembly of guide,
stator & slider:
HM01-23x80
HM01-23x160
HM01-37x120
HM01-37x240
HM01-48x240
HM01-48x360
insertion at end of slider
Max.
tightening torque:
1,0 Nm HM01-23
2,0 Nm HM01-37
3,0 Nm HM01-48
installation of stator 6 mm
recessed
Assembly parts:
HM01-23x80
HM01-23x160
HM01-37x120
HM01-37x240
HM01-48x240
HM01-48x360
stator
Max. friction forces
Attention!
When friction forces are
measured, positioning
controllers generally need to
be disconnected.
The following values are max.
values:
F
r
≤
10 N HM01-23
F
r
≤
20 N HM01-37
F
r
≤
25 N HM01-48
If the measured friction force
is higher, then loosen the
slider mounting screw and
tighten it again to optimize
friction force along the entire
stroke.
slider
slider
mounting screw
