Jun-Air 87R-4P Operation & Maintenance Manual Download Page 3

Page: 3 / 23

We reserve the right to make any alterations which may be due to any technical improvements

Printed in the USA

87R-4P Compressor System User Guide

6190900 (Rev B)

Declaration of Conformity

Konformitätsbescheinigung

Certificat de Conformité

Declaración de Conformidad

Conformiteitsverklaring

Overensstemmelseserklæring

The manufacturer Gast Manufacturing, Inc. declares that the compressor is in conformity with:

• 2014/68/EU Pressure Equipment Directive

• 2014/29/EU Council Directive relating to Simple Pressure Vessels

• 2006/42/EC Machinery Directive

• 2014/30/EU EMC Directive

• 2006/95/EC Low Voltage Directive

• 2011/65/EU RoHS 2 Directive

• 2012/19/EU WEEE Directive

• 1907/2006 and 340/2008 REACH Regulation

Der Hersteller Gast Manufacturing, Inc. bescheinigt, dass der Kompressor entspricht:

• 2014/68/EU Druckgeräterichlinie

• 2014/29/EU Richtlinie der einfachen Druckbehälter

• 2006/42/EC Richtlinie zur Sicherheit von Maschinen

• 2014/30/EU Richtlinie der Elektromagnetischen Verträglichkeit

• 2006/95/EC Richtlinie für Niederspannung

• 2011/65/EU RoHS Directive

• 2012/19/EU WEEE Directive

• 1907/2006 und 340/2008 REACH Regulativ

Le fabricant Gast Manufacturing, Inc. déclare que le compresseur est conforme aux directives suivantes:

• 2014/68/EU Directive équipements sous pression

• 2014/29/EU Directive relative aux appareils à pression simple

• 2006/42/EC Directive sur la sécurité des machines

• 2014/30/EU Directive sur la compatibilité électro-magnétique

• 2006/95/EC Directive sur les basses-tensions

• 2011/65/EU Directive RoHS

• 2012/19/EU Directive DEEE

• 1907/2006 et 340/2008 Réglementation REACH

El fabricante Gast Manufacturing, Inc. declara que el compresor está conforme con:

• 2014/68/EU Directiva de equipos a presión

• 2014/29/EU Directiva en relación a recipientes a presión simple

• 2006/42/EC Directiva de Seguridad de maquinaria

• 2014/30/EU Directiva de Compatibilidad eléctrica magnética

• 2006/95/EC Directiva de baja tensión

• 2011/65/EU Directiva de RoHS

• 2012/19/EU Directiva de WEEE

• 1907/2006 y 340/2008 Reglamento REACH

De fabrikant Gast Manufacturing, Inc. verklaart dat de compressor in overeenstemming is met:

• 2014/68/EU Richtlijn Drukapparatuur

• 2014/29/EU Richtlijn voor eenvoudige drukvaten

• 2006/42/EC Machinerichtlijn

• 2014/30/EU Richtlijn inzake Electromagnetische Compatibilitet

• 2006/95/EC Laagspanningsrichtlijn

• 2011/65/EU RoHS Richtlijn

• 2012/19/EU WEEE Richtlijn

• 1907/2006 en 340/2008 REACH Verordening

Producenten Gast Manufacturing, Inc. bekræfter hermed at kompressoren er i overensstemmelse med:

• 2014/68/EU Direktivet om trykbærenole udstyr

• 2014/29/EU Direktivet vedrørende simple trykbeholdere

• 2006/42/EC Maskindirektivet

• 2014/30/EU EMC-direktivet

• 2006/95/EC Lavspændingsdirektivet

• 2011/65/EU RoHS Direktivet

• 2012/19/EU WEEE Direktivet
• 1907/2006 og 340/2008 REACH Forordningen

Summary of Contents for 87R-4P
























Search results

Summary of Contents for 87R-4P

Reviews:

Related manuals for 87R-4P

Brands by name

Popular brands

Jun-Air 87R-4P, Operation & Maintenance Manual

Search results

Summary of Contents for 87R-4P

Reviews:

Related manuals for 87R-4P

Brands by name

Popular brands