10
6190900 (Rev B)
87R-4P Compressor System User Guide
© 2017, JUN-AIR
We reserve the right to make any alterations which may be due to any technical improvements
Printed in the USA
Electrical Connections
Equipment Alert: If a replacement fuse is required,
then a 12.5 A, 250 VAC resistance time-delay fuse
should be used.
Refer to the specifications table for the electrical
specifications of your model.
1. Remove the screw retaining the cord anchor from
the back panel of the system. Place the cord anchor
around the cord and secure it to the back panel using
the screw provided, ensuring enough slack in the cord
to connect it to the system.
2. Plug the male IEC connector on the power cord into
the female connector on the back panel of the system,
ensuring it is seated securely.
3. Plug the opposite end of the cord into an outlet provid-
ing the voltage and frequency required by the system,
per specifications.
Cord retainer
Air output
1/4 BPST
Fuse holder
IEC C13 power
inlet module
System Voltage Frequency
Charge Time
Recover
Time
Cut-In
Pressure
Cut-Out
Pressure
1770008
115 V
50 Hz/60 Hz
≤
55 s @ 50 Hz
≤
45 s @ 60 Hz
≤
30 s @ 50 Hz
≤
25 s @ 60 Hz
6 bar (87 psi)
8 Bar (116 psi)
1770009
230 V
1770010
230 V
1770018
100 V
