JUMO ecoTRANS Lf 03, Operating Manual

Page: 55 / 68

55
“-” means the corresponding output is not in manual mode.
1st place: analog output for conductivity
2nd place: analog output for temperature
3rd place: logic output 1
4th place: logic output 2 (if available)
In the example above, the analog temperature output is in manual
mode, all other outputs are not.
On leaving the manual mode, the output signal immediately takes
on the value that is proportional to the measured conductivity or
temperature value.
After power-on, manual mode is always deactivated.