3 Configuration
12
✱
Use the
or
key to set the temperature shift (offset).
3.5
Set automatic power-off
✱
Start configuration.
✱
Select the parameter “P.oFF”.
✱
Use the
or
key to set the power-off delay in minutes.
3.6
Adr.
This function is not supported by the present instrument.
-10.0°C to +10.0°C
or
-18.0°F to +18.0°F
The zero point for temperature measurement can be
shifted by this amount, to compensate for probe or
measurement deviations.
Measured temperature minus offset = displayed
temperature.
Off
The zero point shift is switched off (0.0°).
max
2
min
5
C
pH
mV
mV
H
rH
ATC
ok CAL
AL Logg
pH
max
min
2
5
1 — 120:
Automatic power-off delay in minutes.
If no key is pressed on the hand-held meter, it will switch
off after this time has elapsed.
Off
Continuous operation (appropriate when fed from the
electrical supply).
max
2
min
5
pH
mV
mV
H
rH
ATC
ok
CAL
AL Logg
pH
mbar
max
min
2
5
01, 11, 21, — 91:
No function
pH
mV
mV
H
rH
ATC
ok CAL
AL Logg
pH
max
min
2
5