EN
44
slowly several times to distribute the oil in the engine.
5. Replace the spark plug.
6. Store the lawn mower out of the reach of children and unauthorised persons in a well ventilated
area.
TRANSPORT
1. Empty the fuel tank.
2. Remove the cap from the spark plug.
3. Empty the oil tank when the engine is warm.
4. If possible, transport the lawn mower in its original pack.
TROUBLESHOOTING
Problem
Possible cause
Action
The lawn mower is
noisy and vibrates
excessively.
Loose screw unions.
Check screw unions and tighten if
necessary.
The blade retainer screws are loose. Check blade retainer screws and
tighten if necessary.
Blade is unbalanced.
Allow an authorised service centre
to replace blade set.
The engine will not
start.
Defective spark plug.
Replace spark plug.
The engine control lever is not
pressed against the handle.
Press the engine control lever
against the handle.
The primer bulb is empty.
Press the primer pump 3–5 times.
The blades are worn or damaged.
Allow an authorised service centre
to replace blade set.
Fuel tank is empty.
Fill up with fuel.
The engine is flooded.
Unscrew, wipe and refit the spark
plug.
The engine does not
run smoothly.
The air filter is dirty.
Clean the air filter.
The spark plug is dirty.
Clean the spark plug.
Uneven mowing.
The blades are blunt.
Sharpen all the blades.
Mowing height too low.
Adjust to a suitable mowing height.