EN
33
SCRAPER BLADE
The scraper blade is used to remove paint and
adhesive, etc.
PLUNGE SAW BLADE
Ideal for deep plunge cuts in wood, for
example, when installing ventilation grilles.
The saw blade can be used to cut nails.
USE
WARNING!
Always remove the multi-tool plug before
fitting and replacing the tool.
ASSEMBLY OF THE LOCK WASHER
1. Twist out the lock knob fully.
FIG. 2
2. Fit the lock washer (7) (if it is not already
fitted). The tool attachment is magnetic
to hold the washer in place on the
attachment.
FIG. 3
3. Twist the lock knob at a 90° angle away
from the multi-tool. The lock washer is
now fixed and cannot become detached
from the attachment.
FIG. 4
FITTING/REPLACING THE TOOL
Tool with open attachment
1. Twist the lock knob at a 90° angle away
from the multi-tool.
FIG. 5
2. If a tool is fitted, remove the tool from the
attachment.
WARNING!
The actual vibration and noise level when
using the tools may differ from the specified
maximum value, depending on how the tool
is used and the material being processed.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
FIG. 1
1. Locking handle
2. Power switch [ON/OFF]
3. Speed control
4. Tool brackets
5. Ventilation openings
6. Sanding pad with accompanying
sandpaper
7. Lock washer
8. Scraper blade
9. Plunge saw blade of bi-metal
10. Dust extraction with mounting screw
NOTE:
Lock washer (7) can be prefitted on the
multi-tool.
SANDING PAD
Extremely well-suited for sanding in corners
and other areas difficult to access. Choose
a suitable sandpaper for the material to be
processed.