Introduction
The D4386 Multi Application Live Center has
heavy-duty dual bearings and is ideal for
high speed-turning work or CNC applications.
Works on machines with MT2 tailstocks.
Inventory (Figure 1)
Description Qty
A. Live Center Body ............................. 1
B. Bull Nose Reversible Cone ................... 1
C. 60° Full Point Cone ........................... 1
D. Center Spur Point ............................. 1
E. Knockout Rod .................................. 1
Specifications
• Live Center Thread ......................¾"-10
• Bull Nose Cone Diameter ................. 3⅜"
• 60° Full Point Cone Diameter ........... 1⅝"
• Tailstock Taper Size .......................MT2
Installing Cone and Center Point
1. Insert knockout rod (see Figure 1) through
hole in live center body.
Note: If knockout rod
does not
go through
body, slowly rotate threaded center back
and forth until knockout rod is completely
through.
2. Thread either cone clockwise onto live
center and tighten by hand.
COPYRIGHT © DECEMBER, 2019 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan
#20798KS
Model D4386
Multi Application Live Center
Instruction Sheet
Phone #: (360) 734-3482 • Tech Support: [email protected] • Web: www.woodstockint.com
Failure to follow these guidelines could
result in serious personal injury:
• ALWAYS WEAR ANSI-APPROVED EYE AND
EAR PROTECTION when woodturning.
• ALWAYS WEAR ANSI-APPROVED RESPIRA-
TORY PROTECTION when working near
airborne dust particles from turning.
• ALWAYS WEAR ANSI-APPROVED PROTEC-
TIVE GLOVES when handling sharp chis-
els and gouges.
• DO NOT use live center if there is no-
ticeable vibration while turning.
• Back off tailstock pressure if live center
feels hot to the touch after running.
• Disconnect machine from power before
fitting or removing live center.
• Always follow all safety guidelines set
forth by the machine manufacturer.
Figure 1. Model D4386 inventory.
A
B
C
D
E
