EN
35
MOTOR RUNS SLOW
1. Check whether the accessory is worn or
damaged and replace if necessary.
2. Increase the speed with the speed control
(3).
3. Get an authorised service centre to check
the multi-tool if necessary.
VIBRATION OR ABNORMAL SOUND
Check that the accessory is properly installed
and that the multi-tool is undamaged. If the
multi-tool is damaged, it may only be repaired
by an authorised service centre.
MAINTENANCE
WARNING!
Always remove the multi-tool plug before
carrying out any maintenance.
CLEANING
• Always keep the motor’s ventilation
openings free from debris and dust.
• Clean the multi-tool with a slightly damp
cloth. Use a mild detergent, if necessary.
Never use strong, corrosive or abrasive
agents.
REPAIRS
If the power cord is damaged it must be
replaced by a qualified electrician.
STORAGE
Always unplug the power cord from the wall
socket and store the multi-tool in a dry place,
out of the reach of children.
TROUBLESHOOTING
MULTI-TOOL DOES NOT START
1. Check that the wall socket is working.
2. Check that the power cord is in one piece
and connected correctly to the mains
power supply.
3. If the multi-tool still does not start it
should be checked and if necessary
repaired by an authorised service centre.