ENGLISH
1. Casing
2. Left
key
3. Frame
4. Right
key
5.
Fit the casing by inserting it in the opening in the dashboard. Bend up the hooks round the casing
with a screwdriver. Not all the hooks will make contact – use the ones that work best to lock the
casing in place in the dashboard.
1. Dashboard
2. Hooks
3. Screwdriver
4. Casing
6.
Connect the cabling and aerial. Make sure that none of the wires are clenched.
7.
Insert the unit in the casing until it locks in place.
8.
Secure the back edge of the unit with the supplied metal strip. Fasten one end of the metal strip
with an M5 hex nut and spring washer on the retaining screw on the back of the unit. Bend the
metal strip, if necessary. Fasten the other end of the metal strip with the self-tapping 5 x 25 mm
screw and flat washer at a suitable point on the metal part of the vehicle under the dashboard. The
metal strip also earths the unit. Screw in the short thread on the retaining screw in the back of the
unit and the long thread in the dashboard.
40
Summary of Contents for MarQuant
Page 10: ...SVENSKA Anslutning 10...