ENGLISH
Station selector
Press the buttons (2) or (24) to activate the automatic search function. Hold the button pressed in until
MANUAL is shown on the display to select manual station select. If none of the buttons are pressed for a
few seconds the unit will return to automatic search mode and AUTO will be shown on the display.
Automatic station save
Hold the AS/PS (10) pressed in for a few seconds. The radio will search the frequency band once and
check the signal strength, after which the strongest stations will be saved under the default button used.
Program search
Press the AS/PS (10) once to search for the preset station. When the signal strength exceeds the given
threshold level the search stops and the radio receives this signal for several seconds, before the search
is renewed.
Saving stations
Hold one of the number buttons 1 to 6 (18) pressed for a few seconds to save a station in the memory
under the corresponding button.
Local remote stations
Press the LOC (7) button to switch between local and more remote radio stations. When searching for
local stations the unit searches for stronger transmission, and when searching for more remote stations it
searches for weaker transmissions. This function is active during automatic search.
Mono/stereo
Press the MON/ST (14) button to switch between mono and stereo. The reception from remote stations is
sometimes better with mono.
USB playing
USB units can be connected to the USB connection (12).
When you connect a USB unit to the unit the USB unit will search for MP3 or WMA files. Any MP3 or
WMA files found will start to play automatically if the USB mode is activated. If not, you can press the
MODE (11) button to select USB mode. Follow the instructions below to select tunes on the USB unit.
Skip a tune
Press the button (24) or (2) to skip to the previous or next tune. The track number is shown on the
display.
Skip ten tracks
Press the button (15) or (16) to skip ten tracks forward or back.
Pause
Press the button (21) to pause playing. Press again to resume playing.
Intro
Press the INT (20) button to play the intro for all files saved on the USB unit. Press once again to stop the
intro playing and play the actual track.
Repeat
Press the RPT (19) button to repeat the track. Press again to deactivate.
Shuffle
Press the RDM (17) button to play all tracks on the USB unit in random order.
Press again to deactivate.
IMPORTANT
:
The manufacture cannot accept liability for any damage to tracks on the USB unit.
47
Summary of Contents for MarQuant
Page 10: ...SVENSKA Anslutning 10...