ENGLISH
17
4.
Then fit the other rails (Figure 4).
Fig. 4
5.
Spread out the trampoline mat inside the rail.
6.
The trampoline comes with 80 springs. Choose a spring location and call it "Zero". Remember this
location, there are no markings on the trampoline.
7.
Fit the first spring in Zero position on the rail and mat using the assembly tool (Figure 5).
Fig. 5
8.
Then count 20 holes to the left. Fit a spring in hole 20 and in the corresponding position in the
trampoline mat.
9.
Then fit springs in the same way in holes 40 and 60 (Figure 6).
Fig. 6
10.
When these 4 springs have been fitted, continue with the springs in holes 10, 30, 50 and 70. A total
of 8 springs should now have been fitted.
11.
Continue by fitting springs in holes 5, 15, 25, 35, 45, 55, 65 and 75.
12.
Fit the rest of the springs.
13.
Secure the safety instructions to the trampoline (Figure 7).
Fig. 7
