ENGLISH
18
USE
Uses
The handheld vacuum cleaner is designed mainly for vacuuming crumbs and smaller food leftovers on
tables. The appliance is powered by a built-in rechargeable battery. Any improper handling and use will
nullify the warranty.
Charging the battery
•
The appliance is powered by a built-in rechargeable NiMH battery. Follow the instructions below to
charge the battery.
•
Connect the charger to the DC connector at the bottom of the appliance. The indicator light will turn
red while charging and turns off when the battery is fully charged. Disconnect the charger. Ensure
that the battery is not overcharged.
•
Only use the supplied charger. Never use any charger that belongs to another device.
•
Let the battery charge for 16 hours before first use.
•
The charger and wall bracket are supplied as one unit, but can be dismantled.
Before first use
•
Remove all packaging material and check that all parts are present. Contact the dealer if any part
is missing.
•
Follow all the guidelines and safety instructions for best performance and longevity.
Installing the wall bracket
1.
The wall bracket has two attachment holes. Drill 2 holes Ø 6 mm at the desired location and insert
plugs. Use the wall bracket as a template.
2.
Mount the wall bracket using rounded head screws (3.5 x 25 mm). Do not overtighten the screws.
Plugs and screws included.
NOTE:
Make sure that no wires or pipes are in the drilling path.
The charger and wall bracket can be dismantled if the wall bracket is not to be used. Be careful when
dismantling. Turn the connector in the wall bracket 90° left or right until the two flat sides are sitting at 90°
in the bracket. Pull out the connection from the bracket. Carefully remove the power cord from the slot. Be
careful not to damage the power cord or charger.
Starting and switching off
Start the appliance by moving the switch to position I. Only use if the appliance is fully assembled. The
dust container, the filter unit and filter must always be installed. Turn off the appliance by moving the
switch back to position 0.
MAINTENANCE
•
Clean the motor unit with a soft cloth dampened with a mild detergent. Do not use strong or
corrosive detergents. Do not immerse the appliance in water or any other liquid.
•
Wipe the appliance and all accessories carefully before use or storage.
Emptying the dust container
1.
Press the dust container's lock button on the top of the appliance. Hold the dust container in one
hand. The front part of the dust container and filter unit are released.
2.
The filter unit must be removed from the dust container before removing the filter.
3.
Assemble the appliance in the reverse order.
4.
Move the filter unit into the dust container and push it forwards. Hook the dust container on the
bracket at the bottom of the appliance and lift up the dust container so that it locks into place.
Cleaning the dust container
1.
The dust container is to be emptied and cleaned after each use, as moist food leftovers may have
been vacuumed.
2.
Press the release button and remove the dust container.
3.
Remove the filter unit and empty the dust container.
4.
Wipe the dust container with a damp cloth.
5.
Mount the appliance after cleaning.
